We’re pleased to offer a new, comprehensive training course, based on NFPA 70E Standard for Electrical Safe Work Practices. This isn’t your basic safety training course. Instructor, Chris Ordes, has over 30 years of personal experience in and around dangerous electrical hazards and has some moving stories about friends and co-workers involved in electrical incidents. Have you ever been shocked or seen someone come in contact with hot equipment? Tell your story during the session. Personal accounts help to drive the ‘Meter for Life’ message home. This interactive, 8-hour course will educate you about the dangers of Electrical Work, specifically Arc Flash, and provide information about what is expected by OSHA, MSHA and NFPA compliance. Course deliverables include a NFPA 70E Standards Book, Course Workbook, Certificate of Completion and the opportunity to earn CEUs. Download the Brochure here.

Safe Work Practices Could Save Your Life – or Your Co-Worker’s Life

Course Topics Include:

• Hazards of Electricity – Electrical Shock, Arc Flash, Arc Blast
• Electrical Safety Regulations & Standards – OSHA
• De-Energized Work (LOTO)
• Energized Work
• Personal Protective Equipment
• “Meter for Life” Mentality
• Much more!

Visit our Training section to learn more.

Wow. Where did 2018 go? Seems like last year flew by! Time flies when you’re busy releasing new products, hiring new faces and launching a NEW website! Go and check out the NEW and improved inoLECT.com and peruse all of the neat features – like our Meet the Team section, Videos page and all of the social media stuff. It’s pretty awesome, not to brag or anything 🙂

We’re very excited to announce the release of the isoRAC: Single Application Remote Racking device! The newest product in our line of Remote Racking devices connects to and operates the Siemens 81000 and GE LimitAmp IC7160. Remote Racking is the quickest and most cost-effective way to eliminate Arc Flash hazards for your personnel, as well as protect your valuable equipment. Click here to watch the isoRAC in action.Contact your local Sales Rep for a product demonstration today! Download the isoRAC brochure.

inoLECT is proud to announce their latest product in the inoRAC Remote Racking line – the i90. This lightweight, easily installed accessory allows the Remote Racking unit to connect and disconnect a contactor to an energized bus remotely, from outside of the Arc Flash boundary. The process of ‘throwing’ these switch-style levers involves serious hazards, similar to that of racking circuit breakers. Operators are at risk of severe injury or death. Utilizing the i90 device with the advanced technology of an inoRAC, eliminates these risks for personnel and provides optimal equipment protection. No switchgear modifications are required and users can quickly install, use and uninstall the accessory to move to the next breaker or motor starter. Multiple versions are available for compatibility across most major manufacturers medium voltage contactors and other electrical equipment. Call 1-844-inoLECT for a free onsite demonstration or visit www.inolect.com for details.

Watch the i90 in action! Click the link for the video.

A new year means new technology and new industry information to get out to our valued customers. inoLECT is excited to be hosting a series of educational webinars and tutorials on our latest products and services – all for FREE! These short, mini-sessions will take place twice a month, and last around an hour. It’s the perfect way to fill a lunch spot and learn something valuable. Here’s the calendar of events:

1/5/17         Remote Racking Demonstration
1/19/16       Rep Training
2/2/17        Remote Racking Demonstration
2/16/17      Power System Studies
3/2/17        Remote Racking Demonstration
3/16/17      Arc Flash Remediation
4/6/17      Remote Racking Demonstration
4/20/17     INR1 – INR2 Conversion
5/4/17       Racking Demonstration
5/18/17      Power System Studies
6/1/17        Remote Racking Demonstration
6/15/17      Relay/Meter Retrofits
7/6/17        Remote Racking Demonstration
7/20/17     Rep Training
8/3/17        Remote Racking Demonstration
8/17/17      Power System Studies
9/7/17        Remote Racking Demonstration
9/21/17      Arc Flash Remediation
10/5/17      Remote Racking Demonstration
10/19/17    INR1 – INR2 Conversion
11/2/17      Remote Racking Demonstration
11/16/17    Power System Studies
12/7/17     Remote Racking Demonstration
12/21/17   Relay/Meter Retrofits

Email info@inolect.com to RSVP or for details on any of these webinars!

inoLECT is currently seeking a Regional Business Developer to actively and aggressively promote the sale of our solutions in the Western U.S.

Candidates should have specific experience with circuit breakers, power generation facilities or Petro chemical manufacturers. The Regional Business Developer applies specialized training and experience in areas of industrial, electrical and technical sales and marketing. This position is responsible for a large geographic territory, with specific product focus. The Regional Business Developer is responsible for generating sales revenue and financial-goal achievement in an assigned territory (Western United States) and for assigned strategic accounts.

Click for more from LinkedIn

If you’re an electrician who lives in the South, chances are you may not be pulling in the same pay as your colleagues living in other parts of the United States. Based on the latest research available from the Bureau of Labor Statistics (Occupational Employment and Wages Study from May 2015), the “Tar Heel State” pays electricians less than any other state in the nation. Unlike Alaska (the highest-paying state for electricians with an average of $38.18 per hour), North Carolina and several other southern states fall at the low end of the pay spectrum. (Note: Puerto Rico was actually the lowest-paying location for electricians at an average $12.69 per hour and $26,390 annual average salary, but it’s technically a U.S. territory — not a state.) Let’s take a look at the rankings in descending order. Here are the full articles from EC&M. http://ecmweb.com/contractor/5-worst-paying-states-electricians-2015#slide-0-field_images-138151

The newest and most highly anticipated accessory in the product line for the inoRAC2 Universal Remote Racking device is a rechargeable UPS Battery Power System. This optional accessory allows the unit to perform all functions, racking and operations, using battery power instead of 110v electrical outlets. Extension cords are no longer required! The Battery Power System will allow the inoRAC2 approximately 1 hour of usage before requiring a recharge. It was designed to aid customers who are in outages, have lost power for any reason, or have remote breakers or substations where the usage of cables is difficult.

The inoRAC2 is the most versatile, technologically advanced Remote Racking product on the market, with over 100 breaker connection tools available. No switchgear modifications are required. Unlike competing products, the unit monitors torque and breaker position during the entire racking process, providing optimal equipment protection while eliminating the risk for personnel.

Battery Power Systems are available for all inoRAC2 Remote Racking devices today – call for your free onsite demonstration of this life-saving product! 1-844-INOLECT

Click here for more details, pictures and videos!

Many of you know that inoLECT manufactures a universal, technologically-advanced Remote Circuit Breaker Racking Device, the inoRAC2, which eliminates the risk of Arc Flash to personnel. The newest addition to the inoRAC Product Line is the ABB Advac Actuator, which allows compatibility with Advac circuit breakers.

The custom-designed tool is a lightweight, aluminum housing, surrounding a linear actuator equipped with a roller. It easily attaches to switchgear doors with industrial-strength magnets and requires no modifications. When operating, the actuator/roller engages the breaker’s interlock lever, allowing it to perform disengage/engage functions. The tool is installed quickly, very user-friendly and requires one connection cable.

This is only one of the many solutions that make the inoRAC2 the most universal remote racking product on the market. Unlike competitors, the inoRAC2 provides optimal breaker protection by monitoring torque and breaker position, and applying torque only when needed. It is also the only device available that stores breaker profiles for easy access next time it it needed.

Schedule a free demo by calling 1-844-inoLECT or watch the ADVAC video online here.

As you probably know, the OSHA Revised §1910.269 and Subpart V compliance deadline for provisions on fall protection, minimum approach distances, and arc-flash protection is April 1, 2015. The employer must determine the maximum anticipated per-unit transient overvoltage, phase-to-ground, through an engineering analysis no later than this date, for voltages over 72.5 kilovolts. For more information about why OSHA revised its ruling and how you can prepare, visit this helpful list of FAQ. You can find a copy of the rule by clicking here.